Symptom
A N9K-X9736PQ linecard in an ACI mode Nexus 9500 spine switch unexpectedly reloads. The following output is seen in the command "show system reset-reason module 1":
`show system reset-reason module 1`
*************** module reset reason (1) *************
0) At 2019-12-01T00:00:00.00
Reason: line-card-not-responding
Service:Line card not responding => [Failures < MAX] : powercycle
Version:
Conditions
There are no specific conditions for this issue.
Workaround
No known workaround available at this time.
