Symptoms

This video is a great starting point to help identify which of the following sections you should use to troubleshoot further: My Computer Does not Start Duration: 01:21When available, closed caption (subtitles) language settings can be chosen using the Settings or CC icon on this video player.

Cause

NOTE: Click the title of the section that you want to open below, to see the contents. NOTE: To learn more about different symptoms and isolate your issue, see the Dell knowledge base article, Dell Computer Does Not Turn On or Boot Into Windows With Errors Such as No Bootable Device. NOTE: To troubleshoot issues with Dell Alienware computers, see the Dell knowledge base article Alienware Computer Does Not Turn On or Go into Windows. Show all | Hide all No Power: With the Power button is pressed, no Diagnostics LEDs illuminate and the Power button LED does not light up. The computer will not boot to Windows and there is no sign of power to the computer, keyboard, or mouse. No Power For Desktops or All-in-One PCsNo Power For Notebooks No Power For Desktops or All-in-One PCs: Computers have a power light LED that glows when it is receiving power. On Desktops, the front panel of the computer case has LED near the power button. Try these quick steps to recover your Dell computer from a power issue. Try the following steps to resolve a desktop not-powering situation (There are more detailed instructions in the troubleshooting link below.): Problem DescriptionSuggested ResolutionThe computer is either turned off or not receiving power. Reseat the power cable in the power connector on the back of the computer and the electrical outlet.Bypass power strips, power extension cables, and other power protection devices to verify that the computer turns on properly.Ensure that any power strips being used are plugged into an electrical outlet and are turned on.Ensure that the electrical outlet is working by testing it with another device.Use a verified working Power cable.Ensure that the main power cable and front panel cable are securely connected to the system board.All power supply units include a self-test ability in an isolation mode. A test button and LED are on the side of the unit where the AC plug is located. Ensure that the power cable is connected to the supply and press the test button to test the PSU.If the PSU LED does not illuminate, remove the PSU cables from the system board and test again. If the LED still does not illuminate when the test button is pressed, the PSU is possibly faulty.If after removing the cables from the system board and the PSU LED illuminates, one of the attached devices or components could be faulty. Remove all attached components, reattach the PSU cables and using the PSU test button, install each component individually to test.Install a verified working PSU. NOTE: Certain Dell All-in-One PCs may have a separate power adapter. Power Supply Unit (PSU) Built-in Self-Test (BIST) - Desktop If you have identified a No Power issue? You can find out more information and troubleshooting help on this issue by using the article that is linked below: How to Troubleshoot a No Power Issue on your Dell Desktop or All-in-One PCs Here is a quick video that covers all the reasons why your desktop is not starting up. Power issues on Desktop computers Duration: 01:15When available, closed caption (subtitles) language settings can be chosen using the Settings or CC icon on this video player. NOTE: Power cords that are supplied for a monitor may be different based on the Vendor, Dell Monitor power cables are interchangeable with the Dell Desktops. No Power For Laptops: On laptops, the indicator that power is reaching the computer can be a lit LED power button. Alternatively, it may be an LED located in the upper part of the keyboard or along the front edge of the computer itself. Try these quick steps to recover your Dell computer from a power issue. Try the following steps to resolve a laptop no power situation: NOTE: Some models of Notebook such as the Ultrabook models may not have a removable battery. If you check your manual and it does not have your battery as a removable part, then move straight to step 5. Ensure that the battery is fully charged. Remove the battery and disconnect the AC Adapter; Hold the power button down for 15 - 20 seconds to discharge the Static Electricity. Reseat the battery on the Notebook and power it on. Remove the Battery from the Notebook and power it on using only the AC Adapter. Ensure that the Power LED on the AC Adapter is lit. This ensures the functionality of the AC Adapter, also try another working AC Adapter if available. Note: Do you own a Dell laptop? Send your laptop in for repairs, and we will identify and resolve the problem if the laptop does not turn on. This service is currently available in Canada, France, Germany, Italy, the Netherlands, Poland, the United Kingdom, and the United States. Here is a quick video that covers the reasons why your laptop is not starting up. My Dell in 99 seconds: Cannot turn on your laptop Duration: 01:46When available, closed caption (subtitles) language settings can be chosen using the Settings or CC icon on this video player. Once you have identified a No Power issue, you can find out more information and troubleshooting help by checking out the articles that are linked below: How to Troubleshoot a No Power Issue on Your Dell NotebookGuide on Checking Battery Health StatusNotebook Systems: Self-Heal from No Post/No Power/No Video NOTE: The M-BIST test has been built into the Dell family of laptops starting with the Latitude XX90 series of computers. M-BIST - Integrated Motherboard Self-Test toolEvaluates the health of the motherboardM-BIST is designed to operate even if there is no video, no fan, or no hard drive spin-up (new mainboard diagnostic). These symptoms are typically described as No Power, No Video, or Dead System.Press and hold the M key and the Power button down simultaneously: If an error is detected, the Battery status LED lights up Amber and you should contact us.If the Battery status LED does not light up, then no fault is detected with the motherboard. No Post (Power On Self-Test): Once the Power button is pressed, the computer goes through a series of internal checks. If any of these checks should fail, the computer will not boot to Windows. The diagnostic LED's and or Power button LED should illuminate to indicate the potential problem. The term POST references Power-On Self-Test, which is a series of checks the computer goes through whenever it starts. If the computer fails any of these tests, it stops the start-up process and report a fault. Troubleshooting across Desktops, All-in-One PCs and Notebooks use the same procedures, but different reference material. Try these quick steps to recover your computer from a POST or startup issue. Note: Do you own a Dell laptop? Send your laptop in for repairs, and we will identify and resolve the problem if the laptop does not turn on. This service is currently available in Canada, France, Germany, Italy, the Netherlands, Poland, the United Kingdom, and the United States. No POST For Desktops or All-in-One PCsNo POST For Notebooks No POST For Desktops or All-in-One PCs: Indications of a failed POST include: If the computer is displaying the Dell logo and does not move past that point, it has probably failed POST.If the power light lights up and it is amber or orange, this is usually an indicator that it has failed POST. Note down if there is a particular pattern in which it beeps or flashes.If you see the text on a black screen, the computer is performing the POST. If the computer stays in that condition and does not move past it, it has probably failed POST.If the video screen displayed anything at all during the startup process but is now black, this probably indicates that the computer failed POST. NOTES: For information about computer beep codes, see the table in your computers User Manual or have a look at this article: Understanding Beep Codes on a Dell Desktop or All-in-One PCFor information about Desktop LED codes, see the table in your computers User Manual or check out these articles: Diagnostic Indicators (Inspiron Desktops), Diagnostic Indicators (XPS Desktops), Diagnostic Indicators (Vostro Desktops), Diagnostic Indicators (OptiPlex Desktops), And Diagnostic Indicators (Dell Precision Workstations.)If you cannot find the beep or LED diagnostics code your personal computer displays in any of the media above, contact Dell Technical support directly. If the computer is not beeping and the Diagnostic LEDs are not flashing or lit? Unplug all connections and remove all media communication devices (for example external monitors). Reconnect one at a time and check if the computer functions.For a Desktop at the Dell logo screen, tap the F12 key. Enter the One Time Boot Menu and use the arrow keys to select Diagnostics and press enter. Some Desktops do not have an F12 key, to access the boot options you have to press the 0> (zero) key at the Dell logo screen. For information about running and using the ePSA Diagnostics, check out our: ePSA Diagnostics Guide No POST For Laptops: Indications of a failed POST include: If the computer is displaying the Dell logo and does not move past that point, it has probably failed POST.If the computer is beeping or if Diagnostic LEDs, Caps/Num/Scroll Lock LEDs are flashing? Note down if there is a particular pattern in which it beeps or flashes. This is usually an indicator that it has failed POST.If you see the text on a black screen, the computer is performing the POST. If the computer stays in that condition and does not move past it, it has probably failed POST.If the video screen displayed anything at all during the startup process but is now black, this probably indicates that the computer failed POST. NOTES: For information about computer beep codes, see the table in your computer's User Manual.For information about Notebook LED codes, see the table in your computers User Manual or check out these articles: Diagnostic and Battery Indicators (Latitude Notebook and Tablet) and Diagnostic Indicators (Dell Precision Mobile)If you cannot find the beep or LED diagnostics code your personal computer displays in any of the media above, contact Dell Technical support directly. If the computer is not beeping and the Diagnostic LEDs and caps/num/scroll lock LEDs are not flashing or lit? Unplug all connections and remove all media communication devices (for example external monitors). Reconnect one at a time and check if the computer functions.For a laptop, press and hold the key and then press the power button. This starts the preboot testing and launches ePSA. NOTE: For Dell Latitude laptop PCs, you may try to recover the personal computer using the forced ePSA method. For more information, see the Dell knowledge-base article How to Use Forced ePSA to Recover from POST or Boot Failure. For information about running and using the ePSA Diagnostics, check out our: ePSA Diagnostics Guide If you are looking for more information and troubleshooting help to continue resolving this issue, you can use the article that is linked below: How to Troubleshoot a No POST Issue on a Dell PC No Boot: Once the system has loaded the Dell splash screen and then finished the POST checks. The Dell splash screen goes off and the system hands over to the Operating System. If the operating system does not start for any reason, this is called a No Boot. After the computer completes the Power-On Self-Test, it will attempt to boot the operating system. If the computer advances past the Dell logo screen and then stops responding attempting to load the operating system? It is most likely a No Boot issue. Troubleshooting this issue uses the same procedures across Desktops, All-in-One PCs, and Notebooks. Try these quick steps to recover your computer from a boot problem. Note: Do you own a Dell laptop? Send your laptop in for repairs, and we will identify and resolve the problem if you can't get Windows to boot up. This service is currently available in Canada, France, Germany, Italy, the Netherlands, Poland, the United Kingdom, and the United States. Follow the Video Guide Below. My Dell in 99 Seconds: System stopped responding at the Dell Logo Duration: 01:46When available, closed caption (subtitles) language settings can be chosen using the Settings or CC icon on this video player. To rule out any hardware problems, you should run the integrated ePSA diagnostics. NOTE: For Dell Latitude laptop PCs, you may try to recover the personal computer using the forced ePSA method. For more information, see the Dell knowledge-base article How to Use Forced ePSA to Recover from POST or Boot Failure. Most No Boot issues come down to operating system issues. Choose the article appropriate to your Operating System and troubleshoot this further: Dell Computer Does Not Boot to Windows 11 or Windows 10 If the computer is reporting a specific fault on-screen about the Hard Disk Drive, then you can Troubleshoot further on one of the links below: How to Resolve Hard Drive (HDD) or Solid-State Drive (SSD) Issues on your Dell ComputerHow to Run a Preboot Diagnostic Test on a Dell Computer Note: Do you own a Dell laptop? Send your laptop in for repairs, and we will identify and resolve the problem if you can't get Windows to boot up. This service is currently available in Canada, France, Germany, Italy, the Netherlands, Poland, the United Kingdom, and the United States. No Video: Once the Power button is pressed, the computer powers on and proceeds to the POST checks where you may see the Diagnostic LED's illuminate for a short time. The Power button LED illuminates and the keyboard LEDs but there are no signs of video on the Screen/Display. You may hear the Windows login melody, but the screen is blank. If the power indications are normal, but there is never any video that is seen on the computer's display during the startup process? This probably indicates a No Video issue. NOTE: For Desktop computers - Remember that the monitor has a separate power supply. Ensure that the monitor has a power LED indicator showing that it is turned on. NOTE: Certain Dell All-in-One PCs can be connected to an external monitor using VGA, HDMI, or DisplayPort connectors. This feature may vary across different models. See the User Manual of your Dell personal computer. Try these quick steps to resolve video issues on a Dell computer. Troubleshooting a No Video issue: Problem DescriptionSuggested ResolutionThe desktop computer is in a normal on condition. The diagnostic lights are not lit after the computer successfully boots to the operating system but there is no display showing. Ensure that the display is connected to the correct port and turned on.Ensure that the display data cable is not damaged and replace if necessary.Ensure that the correct Input Source on the display is correctly selected.Remove the data cable from the computer. A Self-Test box should appear on the display.If the Self-Test box does not appear on the display, replace the display with a verified working unit.If there is still no display showing, check if video was shown during the POST routine.If video was shown during POST, the display or graphics driver could be the cause.Restart the computer into Safe Mode. To load Safe Mode, press and hold the F8 key as your computer restarts.This loads the Advanced Boot Menu. Select Safe Mode. Install the current versions of the display and graphics card drivers. Restart the computer, and check for video.If available, replace the graphics card with a verified working card.If both graphics card and monitor work ok on another personal computer, then contact technical support to resolve the problem. Note: Do you own a Dell laptop? Send your laptop in for repairs, and we will identify and resolve the problem if the display issue persists. This service is currently available in Canada, France, Germany, Italy, the Netherlands, Poland, the United Kingdom, and the United States. How to Troubleshoot Display or Video Issues on a Dell MonitorHow to Troubleshoot Display or Video Issues on a Dell Laptop NOTE: For Notebooks, press and hold the key and then press the power button. This starts the preboot testing and launches the ePSA diagnostics. The ePSA's tests your video with a series of patterns. My Laptop Display Will not Turn on Duration: 01:46When available, closed caption (subtitles) language settings can be chosen using the Settings or CC icon on this video player. If they look fine, but you want to test more? You can respond to the video test by pressing the letter , and ePSA then launches the LCD BIST test. If you have a no video issue? You can either run the keyboard shortcut to enter the ePSAs or keyboard shortcut to run the LCD BIST from POST. How to Test Your Dell Laptop Screen Duration: 00:24When available, closed caption (subtitles) language settings can be chosen using the Settings or CC icon on this video player. NOTE: Two new diagnostic BIST tests have been built into the Dell family of laptops, starting with the Latitude XX90 generation of computers. M-BIST - Integrated Motherboard Self-Test toolL-BIST - Integrated LCD Power Rail Self-Test toolEvaluates the health of the motherboardChecks if the motherboard supplies power to the LCD.M-BIST is designed to operate even if there is no video, no fan, or no hard drive spin-up (new mainboard diagnostic). These symptoms are typically described as No Power, No Video, or Dead System.L-BIST is designed to test when seeing the symptom of No Video.Press and hold the M key and the Power button down simultaneously: If an error is detected the Battery status LED lights up Amber and you should contact us.If the Battery status LED does not light up, then no fault is detected with the motherboard. Press and hold the Power button down: If there is no display and an error is detected. The Battery status LED flashes 2 x Amber and 8 x White, and you should contact us.If there is no display and the Battery status LED does not light up, then no fault is detected with the motherboard.

Resolution

Further Information Clearing CMOS/NVRAM on your personal computer: The RTCRST jumper allows you to clear NVRAM. The NVRAM is cleared when the jumper is closed. (You can use the jumper from the password bridge.) Remember that it is always best practice to remove the power cable from the personal computer before opening the lid or access panel and going inside. AC power must be applied to the computer for about 10 seconds while the jumper is closed, to clear the CMOS. (This does not necessarily mean turning the computer on, putting power across the motherboard is enough.) Browse to Clearing CMOS via removing and reseating the CMOS battery for visual guides to this process. Pins 1-2 shorted clears NVRAM Warning: Resetting CMOS on most platforms clears the Management Engine BIOS Extension (MEBx) settings including the MEBx password and all configured settings. Disconnect the external power from the personal computer. Remove the computer cover. Locate the 2-pin password connector (PSWD) on the system board. Remove the 2-pin jumper plug. Locate the 2-pin CMOS jumper (RTCRST) on the system board. Move the 2-pin jumper plug from the PSWD pins onto the RTCRST pins for approximately 5 secs. Return the 2-pin jumper plug to the PSWD pins. Replace the computer cover. Connect your computer to main power again, and turn it on. Common issues: These 4 (four) issues are the most common reasons why you would be troubleshooting a problem outside of your Operating System. They break down into 3 (three) outcomes: You identify a hardware issue that reseating does not resolve and contact us to arrange a repair. You identify a software issue and either resolve the issue or contact us for a resolution. You can find out how to identify your warranty status from Dell Knowledge Base article How to Find Warranty Status and Information. You can contact us online through our various Twitter channels: How to Contact Dell on Twitter Duration: 01:36 When available, closed caption (subtitles) language settings can be chosen using the Settings or CC icon on this video player. You can find out about the latest contact information for us from the following link: Contact Support. How to Get Help from Dell Technical Support Duration: 02:22 When available, closed caption (subtitles) language settings can be chosen using the Settings or CC icon on this video player. You can find out more about BIOS recovery options from the Dell Knowledge Base article How to Recover the BIOS on a Dell Computer or Tablet. There are diagnostic and logging tools available on the Dell Support Site or Contact Support. Going through the troubleshooting results in fixing the fault, without a clear reason why. Once you are back into your operating system and online. You can take advantage of the Diagnostics Engine on our Support Site to do a thorough check of your personal computer. How to use the Dell Online Diagnostic Tool to troubleshoot your Dell PC. What Dell diagnostic tools can I use to fix hardware problems?

Support Cases