Purpose
This article provides steps to perform a Fabric Login (FLOGI) reset to a Native Fibre Channel (FC) or Fibre Channel over Ethernet (FCoE) adapter on ESXi 5.1 and later.VM running with Raw Device Mapping (RDM) stopped after reboot.
Resolution
To send the Fabric Login reset from the console:
Open the console or SSH to the ESXi host. For more information, see Using Tech Support Mode in ESXi 4.1, ESXi 5.x and 6.0 (1017910).From an SSH session or command line, interface to the ESXi host:
For FC, run the command: # esxcli storage san fc reset -A vmhbaX For FCoE, run the command: # esxcli storage san fcoe reset -A vmhbaX Where vmhbaX is the adapter on which you are performing the LIP reset.
Related Information
Using Tech Support Mode in ESXi 4.1, ESXi 5.x, and ESXi 6.xファイバ チャネル アダプタおよび FCOE アダプタに対するファブリック ログイン リセットの強制在光纤通道和 FCOE 适配器上强制执行架构登录重置
