Symptom
After Cisco IW9167EH WGB performs factory reset, then doing appropriate configuration to make WGB associate with AP normally, during Uplink 64bytes high traffic load test, the IW9167EH may hit reboot automatically.
This only happens once at most. After finish rebooting, the IW9167EH WGB works normally.
Conditions
1) Perform factory reset in the WGB mode
2) In the WGB mode, send a large traffic flow of uplink traffic like 80Mbps with 60 bytes frame size
Workaround
After Peforming WGB factory reset, when WGB mode is configured, user needs to reboot the WGB device.
Further Problem Description
None
